LPR12 Jnr MX V4

The New LPR12 V4 will have the same great feature of the Version 3, but with a few minor updates. The same brushless gear hub wheel motor is applied with same performance specs as V2 and V3 models. The Chassis has better brake hose management and the bike now uses Shimano Hydraulic brakes. 

• Alloy 6061 frame 
• 140mm hydraulic rear disc brake with Shimano hydraulic lever and calliper.
• Alloy bars 
• Alloy seat post and clamp
• 7Ah battery using High end Samsung cells, rated up to 800 charging cycles
• 10.6kg total weight, nearly 1kg lighter than the V2 

"The LPR12 will revolutionise the way kids learn how to ride a motorbike"- LPR Bikes Australia

With near no noise, an LPR electric bike can give your child extra "seat time", as it can be ridden in backyards without the typical noise complaints a petrol bike will get. Weighing at only 10.6kg, kids can easily pick it up and manoeuvre it around a tight space, just like how they would a bicycle.

A parent speed limiter is easily adjusted with the twist of a knob, so you can start your child at walking pace and then slowly increase the max speed as your child's skills increase, all the way up to 26km/h. Our bikes feature a bolt on cap so this speed cannot be altered children.

The brushless DC motor is located in the rear wheel making for a smooth and quiet ride. Having no drive chain also eliminates a dangerous hazard for those small fingers. The LPR12™ Jnr MX features easy pull brakes with a short throw lever that is close to the bar for those small hands to reach. A durable 6061 aluminium frame paired with black alloy wheels, quick adjust seat height, off road knobby tyres, sealed wheel bearings and bonded rubber spring back foot pegs, all make for a stylish and unique bike.

FAQ's

How long do you get out of a battery?

In our testing, run times are about two and a half hours of riding per battery, however, differences in rider weight, terrain type, rider skill level and temperature can affect run times.

How long does the bike take to charge?

The battery takes 3hrs to charge from empty. Just like a modern lithium powered smart phone or laptop, you do not need to completely discharge the battery before re-charging. Charge at any time during the full-empty cycle. You can also stop charging and go riding before the battery is completely charged. The battery management system (BMS) built into the battery, will automatically monitor the battery for voltage and cell balance. It will not allow overcharging or over discharging below the min/max voltage levels. You can even top it up between rides; an approximate guide, 15 mins of charging gives about 10 mins of riding time.

Are spare parts available?

Yes, we stock all spares, with most parts available on our website. If you need any other parts, just email us at info@lprbikes.com and we are more than happy to help.

Where can I get the bike serviced?

The bike is very simple in design and easy to service. The bike can be sent back to us for repairs and service (you will need to cover the cost of freight + service/repair) or alternatively your place of purchase or a local e-bike or bicycle shop may be able to help out with repairs too.

How can I charge the bike when I am away from 240v power?

You can charge it from your car using a 240v inverter, the charger will draw 80w of power so we recommend a minimum 100w inverter. Some cars have 240v outlets as a standard.

Is the bike easy to build?

The bike comes 95% assembled with only the front wheel, handlebars to fit and power to connect. The bike comes with a complete manual and assembly instructions. We don't supply tools with any of our bikes, although, you will only need basic tools such as metric hex keys and metric spanners to build the bike.

Is this bike legal to use on the road or public areas?

Every state has different laws regarding electric bikes and usage and these laws are evolving and changing quickly. LPR Bikes recommend checking your local state laws for up to date info before riding in any public area's and we recommend riding the bike off road only and on private property. 

Warranty

At LPR Bikes Australia, we want you to ride with a smile, knowing that you purchased your bike with confidence. This is why we offer the original purchaser of a LPR12 Jnr MX Bike;

• 12 months warranty on the frame*

• 12 months warranty on the battery*

• 6 months warranty on electrical components*

• No warranty on consumable parts*

What do I do if I have a faulty product?

If you have got any warranty issues, the quickest and easiest way to get it resolved is to send an email to info@lprbikes.com with a description of the issue and photos of the affected parts.

Warranty Terms and Conditions

*This warranty applies only to the original owner of a LPR12 Jnr MX bike and is not transferable to subsequent owners. Consumable parts (including grips, tubes, tyres, cables, brake pads and saddle covering) are not covered by the warranty. The warranty does not cover water damage to the electronics, paint damage, rust, corrosion, modifications made to the bike, normal wear and tear, improper assembly or maintenance, installation of parts or accessories not originally intended or compatible with the bike as sold and costs of installation, assembly and disassembly. The warranty does not apply to damage or failure due to accident, abuse, misuse, neglect or theft. Costs such as assembly or transport are not covered by the warranty.